Trovex Resilience as a wall protection finish can be used with our colour matched joint trims or hot welded joint, following the same method of installation as the Diamond Wall Cladding range.
Trovex Resilience is not just limited to a wall protection; it is compatible with the Trovex Hygidoor and Hygipod systems, giving you unbeatable protection in your environment.
Extruded semi rigid PVC sheet, 2.5mm thick with embossed satin finish.
Standard sheets are 1220mm wide and up to 3000mm long. Other lengths are available to special order. A full range of fixing and joining accessories are available.
Trovex Resilience achieves Class 0 building regulation when installed onto a non-combustible substrate, and Class 1 Fire Rating to both BS476 part 7 surface spread of flame and BS476 part 6 for fire propagation.
Safe working temperature: 60°C
Material softening point: 80°C
Flash ignition temperature: 390°C (approx)
Set ignition temperature: 450°C (approx)
Trovex Resilience is self extinguishing.
Trovex Resilience has an embossed nonporous surface with dimensional stability and excellent chemical resistance.
A full chemical resistance chart is available on request.
Regular cleaning with liquid detergent and warm water, using a non- abrasive cloth, will ensure quality of performance. The sheet is resistant to solvent cleaning if necessary. See chemical chart for suitability.
Rigid sheet fine linings and panelling
Proprietary plastics cladding – hygienic wall cladding
Trovex Resilience Semi Rigid Hygienic embossed PVC Cladding 2.0mm thick
Plasterboard Partitions | New Plasters | Existing Plasters | WBP Plywood.
Surfaces to be sound and free from contaminates. Dusty or friable surfaces to be stabilised using appropriate stabilising solution. Substrate must be dry – not more than 14% moisture content.
(Please see Trovex Surface Preparation guidelines)
Width – 1220mm
Length – 2440mm / 3000mm – scribed on site to suit ceiling height.
Selected from the Resilience colour range.
Trovex Bond two-part Urethane Adhesive System / Trovex Bond single component Acrylic Adhesive System.
As recommended for particular substrates.
Vertical joints only – standard two-part colour matched joint profile system, optional colour matched hot welded joint system, or colour matched silicon joint system.
Components / accessories
Transition profile detail to base of sheet at junction with floor vinyl, edge profile on exposed sheet edges, thermoformed corners to internal and external angles.
Wetroom junction details where specified on drawings – detail as recommended by manufacturer.
Designed to achieve a perfectly matched finish, this system offers each of the four key elements - sheet material, trim, jointing weld rod and silicone - in the full range of colours.
(Click on each tab to view the available options.)
We’d love to hear about your project, submit your details today and we’ll get in-touch with you to discuss your options.
Boasting extraordinary strength and resistance to impact, moisture and chemicals, Trovex Diamond is ...
Trovex would like to introduce to you the new durable wall cladding – Trovex Resilience, a system ...