We are committed to continually creating products and technologies that enhance healthcare environments by promoting hygiene, privacy and safety.
Hygipod Safe is the unique wash station for complex environments where anti-ligature and self-harm prevention is essential.
Hygipod Safe features:
› One-piece joint free casing
› Full colour range
› Two hinged lockable access panels
› Pre-plumbed with specified sanitaryware
Flush, reinforced access panel
The design is ligature free at the hatch, which is set flush into the face o f the pod. Clearance around the door is less than 0.7mm. In addition, resistance to impact is minimised with the hatch aperture reinforced with an additional stainless steel surround.
Highly secure locks
For additional security, locks are keyed alike instead of featuring a square recess. Keys cannot be removed from the lock while it’s in the open position.
Hygipod Safe features durable sanitaryware from all main sanitaryware supplies, made from high-performance composites.
All hinges are bonded to the framework of the pod with epoxy resin for extra strength & to ensure hinges do not buckle or snap under impact.
The system can simply be placed into position in the room & connected up to services
Integrated into a recess and welded in with hygienic cladding to create a completely flush and continuous surface around the whole room.
Trovex, Axiom House, Travellers Close, Welham Green, AL9 7JL
Trovex Hygipod Safe – Hand wash basin.
Wall substrates must be structurally sound and capable of supporting the fixed unit.
Additional vertical support members are recommended for partition walls.
Structural plinth by others to receive covered vinyl floor covering, finished size including vinyl [120mm] high, (standard 743mm wide, 220mm deep).
Hygipod Safe unit to be seated on plinth with rebated overlap detail sealed to floor covering with approved sealant, and fix back to wall with bracket system supplied.
Height – To suit ceiling height (Max 3000mm) / scribed on site to suit ceiling height.
Width – Standard 750mm
Depth – Standard 225mm
Standard White or selected from the Trovex colour collections.
Seal to wall with approved sealant or hot-welded if in flush configuration.
Components / Accessories
DVS VR01-030 High Security Basin with integrated backplate and tactile / wave-on switch kit and resealing bottle trap. Control box and thermostatic mixing valve with copper feeds and quarter turn lever service valves for bottom / top entry of hot and cold services
Single piece, joint free casing with thermoformed corners. One upper & one lower access panel, flush with the face of the pod, with maximum clearance around hatch of 0.7mm. Galvanized steel frame door stop to the rear of the hatch aperture. Projection hinges with 180 degrees opening which are mechanically fixed and resin bonded. Keyed alike locks with 90 degree key turn.
Designed to achieve a perfectly matched finish, this system offers each of the four key elements - sheet material, trim, jointing weld rod and silicone - in the full range of colours.
(Click on each tab to view the available options.)
We’d love to hear about your project, submit your details today and we’ll get in-touch with you to discuss your options.