Where anti-ligature and self-harm prevention is essential.
We are committed to continually creating products and technologies that enhance healthcare environments by promoting hygiene, privacy and safety.
Hygipod Anti-ligature is the unique wash station for complex environments where anti-ligature and selfharm prevention is essential. This design is ligaturefree at the access hatch, which is set flush with the face of the pod. The clearance around the door is less than 0.7mm, plus the resistance to impact is maximised as it is re-enforced with a concealed interlocking steel framework. For added security, the locks are ‘keyed alike’ instead of featuring a square recess.
Trovex, Axiom House, Travellers Close, Welham Green, AL9 7JL
Trovex Hygipod with overlap skirting detail encapsulated with Trovex hygienic PVC.
Wall substrates must be structurally sound and capable of supporting the fixed unit.
Additional vertical support members are recommended for partition walls.
Structural plinth by others to receive coved vinyl floor covering, finished size including vinyl [120mm] high,
(standard 740mm wide, 220mm deep).
Hygipod unit to be seated on plinth with rebated overlap detail sealed to floor covering with Trovex Seal
clear sealant, and fixed back to wall with bracket system supplied.
Height – To suit ceiling height (Max 3000mm) / scribed on site to suit ceiling height.
Width – Standard 750mm
Depth – Standard 225mm
Standard White or selected from the Trovex colour collections.
Seal to wall with approved sealant.
Components / Accessories
Predrilled for Armitage Contour 21 50cm back outlet washbasin (S215401) with concealed hangers, toggle
bolts and clips (S911267) fitted ready to receive basin. Preplumbed with Armitage Markwik demountable
bib mixer tap with single sequential lever and detachable spout with bioguard outlet (A6243AA), with
copper feeds and quarter turn lever service valves for bottom entry of hot and cold services to tap. Basin
supplied in separate packaging with waste outlet adaptor (S875067), plastic strainer (S874667) and
resealing bottle trap (75mm seal) ready for connection to waste behind lower access panel.
Thermoformed external corners, two lockable access panels on projection hinges, predrilled and
preplumbed for basin where applicable.
Designed to achieve a perfectly matched finish, this system offers each of the four key elements - sheet material, trim, jointing weld rod and silicone - in the full range of colours.
We’d love to hear about your project, submit your details today and we’ll get in-touch with you to discuss your options.