About Trovex Stainless Steel components
The Trovex range of stainless steel sheets and trims complements the Trovex Diamond system in food-preparation areas, making it easy to provide heat-resistant surfaces where required.
Stainless steel splashbacks are recommended for use directly behind a cookline, due to the high temperatures involved. The system marries with Trovex hygienic wall cladding and can be joined directly to the pvc sheets.
Stainless steel corner guards give protection to vulnerable external corners, ensuring that the normal aesthetic and hygienic standards of Trovex Diamond hygienic wall cladding are maintained.
Rigid sheet fine linings and panelling
Stainless steel wall cladding
Trovex 304 Grade stainless steel hygienic wall system
T603 (2.0 x 1.0m)
T604 (2.5 x 1.25m)
1.2 / 0.9 / 0.7mm
Surface to be sound and free from all contaminates. Dusty or friable surfaces to be stabilised using appropriate stabilising solution. Substrate must be dry - not more than 14% moisture content.
Concrete blockwork / plaster board substrate
TB300/25 all over adhesive in accordance with manufacturer's recommendations.
As manufacturer's specification
Self finish. Silicone joint 3-4mm wide. Protective film to be removed, surface to be cleaned in accordance with manufacturer's recommendations.
Primer / sealer
As required depending on condition of substrate.
Components / accessories
Proprietary stainless steel low profile jointing profile and transition profile to base of sheet.
Not quite sure what you need?
We’re always pleased to talk through the requirements of a project, without obligation. Whether you need something from our standard range or you’re considering a bespoke design, we’re here to help.