About Resilience

Trovex would like to introduce to you the new durable wall cladding – Trovex Resilience, a system that maximises protection in active environments. This is available in a wide variety of colours from our Ambience and Radiance range. The Resilience sheet has an embossed surface adding a further dimension to the Trovex product range where protection is crucial. The minor undulations of the surface of the sheet will further prevent any scratching and scuffing, maintaining the surface condition for longer. The enduring aesthetic quality of the product keeps areas looking brighter for longer and is perfect for non-clinical areas and high-traffic areas.

Trovex Resilience as a wall protection finish can be used with our colour matched joint trims or hot welded joint, following the same method of installation as the Diamond Wall Cladding range.

Trovex Resilience is not just limited to a wall protection; it is compatible with the Trovex Hygidoor and Hygipod systems, giving you unbeatable protection in your environment.

Request the brochure

Technical profile

Extruded semi rigid PVC sheet, 2.5mm thick with embossed satin finish.

Standard sheets are 1220mm wide and up to 3000mm long. Other lengths are available to special order. A full range of fixing and joining accessories are available.

Fire Behaviour
Trovex Resilience achieves Class 0 building regulation when installed onto a non-combustible substrate, and Class 1 Fire Rating to both BS476 part 7 surface spread of flame and BS476 part 6 for fire propagation.

Safe working temperature: 60°C
Material softening point: 80°C
Flash ignition temperature: 390°C (approx)
Set ignition temperature: 450°C (approx)
Trovex Resilience is self extinguishing.

Chemical Resistance
Trovex Resilience has an embossed nonporous surface with dimensional stability and excellent chemical resistance.

A full chemical resistance chart is available on request.

Regular cleaning with liquid detergent and warm water, using a non- abrasive cloth, will ensure quality of performance. The sheet is resistant to solvent cleaning if necessary. See chemical chart for suitability.

Illustrated details

  • Thermo-formed internal and external corner
    TD01 Thermo-formed internal and external corner
  • Two-part joining section
    TD02 Two-part joining section
  • Two-part transition section for vinyl floor and hygienic cladding
    TD03 Two-part transition section for vinyl floor and hygienic cladding
  • Sheet vinyl floor wetroom
    TD04 Sheet vinyl floor wetroom
  • Edge trim
    TD05 Edge trim
  • External corner
    TD06 External corner
  • External corner
    TD07 External corner


Rigid sheet fine linings and panelling

Proprietary plastics cladding - hygienic wall cladding


Product ref
Trovex Resilience Semi Rigid Hygienic embossed PVC Cladding 2.0mm thick

Plasterboard Partitions | New Plasters | Existing Plasters | WBP Plywood.

Surfaces to be sound and free from contaminates. Dusty or friable surfaces to be stabilised using appropriate stabilising solution. Substrate must be dry - not more than 14% moisture content.

(Please see Trovex Surface Preparation guidelines)




Width - 1220mm

Length - 2440mm / 3000mm – scribed on site to suit ceiling height.

Selected from the Resilience colour range.

Trovex Bond two-part Urethane Adhesive System / Trovex Bond single component Acrylic Adhesive System.

As recommended for particular substrates.

Joint treatment
Vertical joints only - standard two-part colour matched joint profile system, optional colour matched hot welded joint system, or colour matched silicon joint system.

Components / accessories
Transition profile detail to base of sheet at junction with floor vinyl, edge profile on exposed sheet edges, thermoformed corners to internal and external angles.

Included features
Wetroom junction details where specified on drawings - detail as recommended by manufacturer.

Colours & finishes

Designed to achieve a perfectly matched finish, this system offers each of the four key elements - sheet material, trim, jointing weld rod and silicone - in the full range of colours.

Material samples of any colour are available for rapid despatch to a specified address, making it easy to check and confirm your choices. Please note that Resilience is not stocked to the same levels as the other cladding sheets so it is recomended that you make contact with Trovex to check that we can fulfill your requirement when you need it.

Resilience Textured

  • Feather
  • Cerulean
  • Kiwi
  • Bonbon
  • Amethyst
  • Shoal
  • Seashell
  • Mocha
  • Bliss
  • Teal
  • Orchard
  • Chalk
  • Galant
  • Sky
  • Enigma
  • Chiffon
  • Tempest
  • Hercules
  • Intuition
  • Ocean

Not quite sure what you need?

We’re always pleased to talk through the requirements of a project, without obligation. Whether you need something from our standard range or you’re considering a bespoke design, we’re here to help.

Get in touch

01707 254 170