About Trovex Diamond

Boasting extraordinary strength and resistance to impact, moisture and chemicals, Trovex Diamond is used to effectively clad walls and ceilings, and create high-performance doorsets, providing a low-maintenance and antibacterial, hygienic surface.

It is the versatility of Trovex Diamond, as well as its impressive range of benefits, that makes it such a successful material. With a range of applications, addressing the most complex requirements, it is thermoformed around corners, married up with stainless-steel surfaces, and used to create ultra-hygienic doorsets. The tough, long-lasting surface is impervious to impact, spills and stains. Offering exceptional durability, this is an investment that gives returns, year after year.

The complete system includes colour matched trims and weld rod, adhesive and silicone, and is supplied with the option of installation. You can rely on Trovex Diamond, which meets BREEAM requirements and is tested by BRE.

The intrinsic Bactiban™ property that is built into Trovex Diamond effectively prevents growth of germs and bacteria, helping in the drive for improved infection control and hygiene.

The Ecosure assurance symbol is a reminder of the eco-friendly properties of Trovex Diamond. As a non-timber product, it has no impact upon the rainforests, and is completely recyclable at the end of its long lifespan. Post-production waste is regenerated into raw material, and the low oil content ensures minimal carbon impact.

Request the brochure

Technical profile

Extruded semi rigid PVC sheet, 2.5mm thick with smooth satin finish. Sheets are delivered with a peelable film providing protection throughout installation.

Standard sheets are 1220mm wide and up to 3000mm long. Other lengths are available to special order. A full range of fixing and joining accessories are available.

Fire Behaviour
Trovex Diamond achieves Class 0 building regulation when installed onto a non-combustible substrate, and Class 1 Fire Rating to both BS476 part 7 surface spread of flame and BS476 part 6 for fire propagation.

  • Safe working temperature: 60°C
  • Material softening point: 80°C
  • Flash ignition temperature: 390°C (approx)
  • Set ignition temperature: 450°C (approx)
  • Trovex Diamond is self extinguishing.

Chemical Resistance
Trovex Diamond has a smooth nonporous surface with dimensional stability and excellent chemical resistance.

A full chemical resistance chart is available on request.

Regular cleaning with liquid detergent and warm water, using a non- abrasive cloth, will ensure quality of performance. The sheet is resistant to solvent cleaning if necessary. See chemical chart for suitability.

Illustrated details

  • Thermo-formed internal and external corner
    TD01 Thermo-formed internal and external corner
  • Two-part joining section
    TD02 Two-part joining section
  • Two-part transition section for vinyl floor and hygienic cladding
    TD03 Two-part transition section for vinyl floor and hygienic cladding
  • Sheet vinyl floor wetroom
    TD04 Sheet vinyl floor wetroom
  • Edge trim
    TD05 Edge trim
  • External corner
    TD06 External corner
  • Hot-welded joint
    TD07 Hot-welded joint


Rigid sheet fine linings and panelling

Proprietary plastics cladding - hygienic wall cladding


Product ref
Trovex Diamond Semi Rigid Hygienic PVC Cladding 2.5mm thick

T10/25/WE (2.5 x 1.22m White)

T10/275/WE (2.75 x 1.22m White)

T10/30/WE (3.0 x 1.22m White).

Fair faced blockwork/partition system.

Surfaces to be sound and free from contaminates. Dusty or friable surfaces to be stabilised using appropriate stabilising solution. Substrate must be dry - not more than 14% moisture content.




Width - 1220mm

Length - 2500mm / 3000mm – scribed on site to suit ceiling height.

Standard Diamond White or selected from the Brilliance, Radiance or Ambience colour collections.

Trovex Bond two-part Urethane Adhesive System / Trovex Bond single component Acrylic Adhesive System.

As recommended for particular substrates.

Joint treatment
Vertical joints only - standard two-part colour matched joint profile system, optional colour matched hot welded joint system.

Components / accessories
Transition profile detail to base of sheet at junction with floor vinyl, edge profile on exposed sheet edges, thermoformed corners to internal and external angles.

Included features
Wetroom junction details where specified on drawings - detail as recommended by manufacturer.

Download specification (37.0 KB)

Colours & Finishes

Designed to achieve a perfectly matched finish, this system offers each of the four key elements - sheet material, trim, jointing weld rod and silicone - in the full range of colours.

Material samples of any colour are available for rapid despatch to a specified address, making it easy to check and confirm your choices.

White Satin

  • Diamond White

Ambience Satin

  • Calico
  • Mystique
  • Lilac
  • Orchid
  • Pistachio
  • Stone
  • Dove
  • Almond
  • Azure

Radiance Satin

  • Pacific
  • Coral
  • Caribbean Sea
  • Silver Lining
  • Emperor
  • Dawn
  • Daydream
  • Monsoon

Brilliance High Gloss

  • Energy
  • Meadow
  • Limelight
  • Avocado
  • Moss
  • Clover
  • Forest
  • Jewel
  • Summer
  • Petrol
  • Lily
  • Candy
  • Amber
  • Stamina
  • Fantasy
  • Bordeaux
  • Titanium
  • Chestnut
  • Panther
  • White Hot

Resilience Textured

  • Feather
  • Cerulean
  • Kiwi
  • Bonbon
  • Amethyst
  • Shoal
  • Seashell
  • Mocha
  • Bliss
  • Teal
  • Orchard
  • Chalk
  • Galant
  • Sky
  • Enigma
  • Chiffon
  • Tempest
  • Hercules
  • Intuition
  • Ocean

Essence Satin

  • Pacific Walnut
  • Regal Rosewood
  • Gabon Ebony
  • Sand Beech
  • Natural OaK
  • Truffle Beech
  • Smoked Elm
  • Provincial Plum
  • Warm Beech
  • Majestic Oak
  • Deep Walnut
  • Fresh Maple

Not quite sure what you need?

We’re always pleased to talk through the requirements of a project, without obligation. Whether you need something from our standard range or you’re considering a bespoke design, we’re here to help.

Get in touch

01707 254 170